How to install solar lights in Chinese
- China Lamp is an integral part of modern landscape in China. It not only has high ornamental value, but also stressed and the historical culture and the surrounding environment harmony. China's ancient civilization, five thousand, one thousand years of civilization, there's no place to be able to be reflected on the shape of lamps in China.
Chinese lanterns detailed installation steps of
the selection, construction site
inspection on the construction site and the surrounding environment, to ensure the feasibility of the project implementation.
the installation site must be catchment is smooth, if within 10 meters from where to install the pond has a low point, low must be higher than the water level in 50 years, the foundation of large water points.
cable and optical fiber cable and other public facilities can't laid underground at the scene of the installation.
according to the construction design, light pole position and spacing is determined. Such as the scene changes, should be promptly with the landlord to determine the solution.
2, light pole basement
our company provide the corresponding specification and the material of lamps and lanterns of China base material embedded parts drawings.
after excavation, check to face obstacles and the influence of underground pipeline. If it is necessary to put aside everything, stop brutal construction.
basic pouring concrete should be processed in centralized way, using a blender even mixing, and then use the vehicle to the construction site.
in the concrete pouring concrete independent foundation on cushion, vibration casting when casting; Before pouring out, buried anchor embedment and grouting twice.
pay attention to the bolt protection measures based on the light pole, prevent damage of bolt.
hooks should be located in the central part of embedded parts, 5 cm higher than the concrete embedded part ( In order to avoid water) 。 Pipe inside diameter should not less than 1 of steel wire hose diameter. 5 times. Downstream port remained slightly downward sloping. In the process of construction, pipe opening must be blocked, in order to avoid the warp into such as silt on the pipes.
pouring is completed, level adjustment of embedded parts, smooth concrete base.
before install the lamp base, it is necessary to find the vertical degree from two directions. Installation process must be monitored verticality, verticality deviation shall not be more than 5 mm, to ensure that the lamp of verticality.