Sunfree Lighting Limited is a high-tech company specialized in R&D and production of solar LED lights and LED lighting.

How to install the led road lanterns

by:SUNFREE     2021-02-16
LED street lamp installation of the first and important step is to create a base, is like building a house. LED lights factory it is a solid cold light source, green pollution-free, less power consumption, high photosynthetic efficiency, long life, therefore, LED lights will be a road lighting energy saving renovation of choice. LED street lamp which is a kind of based on semiconductor PN junction formation with a weak electricity can glowing efficient solid-state light source, in certain positive bias voltage and the electrical flow injection, injection of holes and injection P N the electronic after spread to have source area by the radiative recombination and emit photons, convert electrical energy directly into light energy. No matter what you do, the foundation is always important. LED street lamp which is a kind of based on semiconductor PN junction formation with a weak electricity can glowing efficient solid-state light source, in certain positive bias voltage and the electrical flow injection, injection of holes and injection P N the electronic after spread to have source area by the radiative recombination and emit photons, convert electrical energy directly into light energy. Basis for the structure of fixed solar lamp, also have the effect of placement and protect the storage battery.
because of the size of the height of the sun and the wind is different, all kinds of the intensity of the sun varies because of the foundation. In the process of construction, ensure the foundation strength and structure meet the design requirements.
according to the construction site, construction personnel are responsible for the installation site of unreasonable questions, and stop the construction, and report the relevant person in charge of inward at the first time. Should be made within the time limit in accordance with the actual construction standards. LED street light foot cage installation steps are as follows:
1. In strict accordance with the LED street lamp to lamp size ( Construction personnel to determine the construction size) , mining tunnel along the way;
2。 In the foundation, buried cage on the surface must be level ( By the level gauge measuring and testing) , on the cage of anchor bolt must be perpendicular to the base surface ( With square measuring and testing) 。
3, after the pit excavation, put 1 to 2 days, look to whether have the groundwater seepage. Groundwater seepage, immediately stop the construction;
4。 Construction based the tools needed to ready before the LED street lamp, and select the construction experience of construction personnel.
5。 According to the led street light map strictly choose the appropriate cement. High acidity and alkalinity of soil must use acid and alkali of special cement; There should be no impurities in soil and other soil influence the strength of the concrete in the fine sand and stone;
6。 Around the foundation soil must be compacted.
place the battery box at the bottom of the tank in the foundation has to be put on the hole or according to the requirements of the drawings.
( Eight) Before construction, must avoid jams threading pipe ends, the foreign body in the process of construction and after construction to enter or congestion, caused by the installation process or a line;
9。 Based the production of led lights finished, need to maintain (5 to 7 days According to the weather) ;
10。 LED lights installed only on the basis of LED street light passing experience after then.
?

Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: