Sunfree Lighting Limited is a high-tech manufacturer specialized in R&D and production of solar led street light

LED street light waterproof performance LED light pole repair skills

by:SUNFREE     2021-03-14
Since the working environment of LED street lights is outdoors and rainy, the material of LED street lights is best to be waterproof and corrosion-resistant. With the rapid growth of the national economy, the contradiction between my country's energy supply and demand has become increasingly prominent. There is a serious shortage of power supply, and energy conservation is an urgent problem to be solved. Therefore, the development of a new type of high-efficiency, energy-saving, long-life, high color rendering index, and environmentally friendly LED street lamps is of great significance to the energy saving of urban lighting. LED street lamp manufacturers ED street lamps have much higher light color rendering than high-pressure sodium lamps. The color rendering index of high-pressure sodium lamps is only about 23, while the color rendering index of LED street lamps is more than 75. From the perspective of visual psychology, it can reach the same brightness and the illuminance of LED street lamps is average. It can be reduced by more than 20% than high-pressure sodium lamps. The anti-corrosion treatment of the LED light pole is carried out by the method of hot-dip galvanizing the surface and spraying. The anti-corrosion quality complies with the regulations. The average thickness of the hot-dip galvanized layer is not less than 85 microns. The LED light pole is sprayed with high-quality outdoor pure polyester powder, with an average thickness of more than 100 microns. The sprayed plastic layer is uniform, complete and smooth, and its adhesion meets the requirements of relevant standards. The access door under the LED light pole is parallel to the axis of the light pole, 400mm above the ground, and a 320mm×120mm access door is opened. The door is welded with a ground terminal; the edges of the door hole and door cover are smooth and flat, and there is a gap between the door cover and door hole after assembly Not more than 2mm, the door cover is interchangeable, and has effective and reliable anti-theft measures. Street lights are an inaccessible part of our lives, but street lights also have many shortcomings. If it involves power outages, the entire area will be out of power, which will be very inconvenient. Street lights are not only electrical pollution equipment, but also high electricity and maintenance costs. And sometimes if it is not properly protected, it may be stolen, so we must pay special attention to these things when we produce street lights. Street lights are closely related to our lives. In addition to ordinary street lights, and more and more LED street lights into our lives, we should also pay attention to some details in the installation of LED street lights. Disassembly and assembly site selection of solar LED street lights. After assembly, the disassembly and assembly site should be close to the installation location for easy transportation. Try to avoid working on rainy days. Count the lamps according to the delivery list. Disassemble and refer to the packing list, check each part, check for damage such as collision, wear, deformation and scratches. Pole components and wear-resistant accessories (such as solar cell modules, lamp holders, etc.) must be placed with soft cushions to avoid unnecessary damage such as scratches during the installation process. When placing the lower pole assembly, an iron frame support is required at the upper end to facilitate the installation of the pole assembly. Street lights are closely related to our lives. In addition to ordinary street lights, more and more LED street lights have entered our lives. We must pay attention to some details of the installation of LED street lights. Installation and assembly location of solar LED street lights. The disassembly location should be close to the installation location to facilitate transportation after assembly. Try to avoid working in the rain. Count the lamps according to the delivery list. Disassemble and refer to the packing list, check each part, check for damage such as collision, wear, deformation and scratches. Pole components and wear-resistant accessories (such as solar cell modules, lamp holders, etc.) must be placed with soft cushions to avoid unnecessary damage such as scratches during the installation process. When placing the lower pole assembly, an iron frame support is required at the upper end to facilitate the installation of the pole assembly. Through practical applications, it is proved that high-power LED street lights have the advantages of energy saving, environmental protection, long life, adjustable brightness and color temperature, and good color performance. With the maturity of LED technology and the continuous improvement of efficiency, LED solid-state lighting has become the trend and best solution for energy saving. The energy-saving characteristics of LED street lighting systems mainly depend on the LED chip and power supply.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP