What are some tips in the LED street lamp system debugging?
Street lamps in the process of installation debugging work is very important, so the LED street light can be applied in the process of system debugging, and description of LED street light in the system debugging technique is illustrated, and the debugging of the LED system has made the related instructions.
Manufacturer of LED lights ED street lamp light is higher than high pressure sodium lamp many color, high pressure sodium lamp only around 23, color rendering index and the LED street light color rendering index above 75, think in terms of visual psychology, to achieve the same brightness, LED street light can, on average, more than 20% lower than the high-pressure sodium lamp.
LED street lights maintenance costs low, compared with the traditional street light, LED street lights maintenance cost is extremely low, through the comparison, can recover all input costs less than 6 years.
LED street light automatic control and energy saving device, can realize to meet the requirements of different times lighting cases, most likely to reduce the power, saves the electricity.
Can realize the computer dimming, period and control, light control, temperature control, humanized functions such as automatic inspection.
Before installation and upgrade the LED street light, the battery must be tested, to determine whether the lamps and lanterns can light up, in order to avoid was found after the completion of the ascent, and increase the cost of installation and commissioning.
What are the skills in the process?
Set time control functions.
According to the daily lighting design, according to the instruction set a time control points of the controller, a night lighting time should not be higher than the design value, can only be equal to or less than the design value.
Optical function simulation.
If it is during the day, after wiring, according to the controller manual mentioned in the delay time, opaque material can be used to completely stop the solar array with surface (
Or on the controller battery components connection is removed)
Usually 5 min)
, after the corresponding time, lamps and lanterns can light up automatically.
If it can light up, light control function normal.
If can't light up, light control function is invalid.
It is necessary to check the controller Settings.
Here are about how to enter the site in the process of using leds related instructions.
If you have any questions, please feel free to contact us, we will continue to provide you with updates.