What are the precautions for installing LED street lights?
Installing LED street lights is the first step to use LED street lights correctly. The difference between LED street lamp manufacturers and conventional street lamps is that the LED light source adopts low-voltage DC power supply, and is a high-efficiency white light synthesized by GaN-based power blue LED and yellow. It has high efficiency, safety, energy saving, environmental protection, long life, fast response speed, and display. The unique advantages of high color index can be widely used on roads. The outer cover can be made, the high temperature resistance can reach 135 degrees, and the low temperature resistance can reach -45 degrees. With the rapid growth of the national economy, the contradiction between my country's energy supply and demand has become increasingly prominent. There is a serious shortage of power supply, and energy conservation is an urgent problem to be solved. Therefore, the development of a new type of high-efficiency, energy-saving, long-life, high color rendering index, and environmentally friendly LED street lamps is of great significance to the energy saving of urban lighting. How to install LED street lights correctly? We need to pay attention to the precautions for using LED street lights. Next, we will introduce you to the relevant precautions in the installation of LED street lights. First of all, when the installation positions are different, it should also be noted that if the direction of the LED street light is installed in the northern hemisphere, the solar panel should be as facing the south or the light receiving surface as possible. Get maximum energy. If you are in the southern hemisphere, install solar panels on the north-facing or light-receiving surface as much as possible. According to actual engineering needs, choose the best installation location and install solar street lights along the road. Then, during the geological excavation process, the size of the excavation should be determined according to the requirements. Before infrastructure construction, geological conditions should be investigated in accordance with the requirements of local laws and regulations. If the ground surface is all soft soil, the excavation depth should be deepened. In the process of pouring the foundation of the LED street light, the next step will be carried out after 24 days of curing. During the curing process of concrete, it must be watered and cured regularly until the concrete is completely cured before the concrete can be installed. What are the specific precautions for installation? 1) Remove the package and check the accessories; 2) Connect the external waterproof connector to test whether the light can work normally. 3) Fix the rear seat of the lamp at the proper height of the lamp pole. Finally, in order to ensure that the beauty and battery modules can better receive solar energy, you can clean the dust, leaves or other impurities on the battery modules once every six months. In areas with severe dust or harsh environments, the frequency of maintenance may be shortened due to circumstances. About the installation of LED street lights, you will introduce here. If you have any questions, you can follow our website or call us. We will provide you with updated information.