Sunfree Lighting Limited is a high-tech manufacturer specialized in R&D and production of solar led street light

What things need to be inspected before leaving the factory?

by:SUNFREE     2021-04-05


LED solar street light is composed of solar panels, solar street light controllers, LED lamps and solar batteries. Many people think that after purchasing these five components, they can be used directly. In fact, it is not. LED solar street lights need to be inspected before leaving the factory to ensure their normal use. So, what inspections does the solar street light factory need to go through?

1. The exterior structure inspection of LED solar street light lamps usually stipulates the external light materials of solar lamps in the bidding document, and these regulations will be checked in detail.

Appearance inspection: The paint color is uniform, no pores, cracks, and impurities; the coating must be tightly adhered to the base material; the surface of the housing of the LED solar street lamp parts should be smooth and flat, and there should be no Scratches, cracks, deformation and other defects;

Dimension check: the external dimensions should meet the requirements of the drawings;

3. Material inspection: the materials used for each part of the lamp and its structural design should meet the requirements of the drawings; 4. Assembly inspection: the fastening screws on the surface of the lamp should be tightened, the edges should be free of burrs and sharp edges, and the connections should be firm and free Loose.

2. The LED solar street lamp chip database of LED solar street lamp chip source identification and detection contains information on many domestic and foreign manufacturers' chips, and the data is comprehensive, accurate and fast updated. Through searching and matching, the chip model and manufacturer can be confirmed, which will help the lighting manufacturer to improve the quality and efficiency of quality control.

3. Waterproof detection LED solar street light is an outdoor lighting street light. It should be used in an aerial area of u200bu200bseveral meters to more than ten meters. It is extremely difficult to replace and repair the street light, and it is required to have good waterproof and dustproof performance.

Therefore, the waterproof and dustproof level of LED solar street lights is particularly important. With the maturity of LED technology and solar technology, more and more LED solar street lights have begun to be used in outdoor road lighting. LED solar street lights use the volt effect to convert light energy into electrical energy and store them in the solar battery. It has the advantages of green and clean, simple installation, etc., and is deeply loved by people.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry. We will get back to you ASAP